Mega inspiration wall

20130719-085230.jpg

Now that I have decided to do something crafty every day, the first step was to work on the craft room a bit. I didn’t have anything on the walls and was using duck tape to put up my stuff. Very un-inspiring!

At the store, we use artists canvases a lot in window display, so I had them send me home 4 big ones, 30×30. Sadly, I couldn’t find cork that size, but did find some 24 x 24, so I just had to figure out how to make the edges pretty. The fabric was in my stash, bought in 2005 when I was going to make a car seat slip cover!

I just stapled the fabric to the back and hot glued the edge to the front. I didn’t need to cover the entire canvas because the cork went over. I simply screwed the cork from the back through the cross bars. Now my cork is not only pretty, I was super easy to attach to the wall using the frame of the canvas. And because I didn’t glue all the edges of the cork (only the corners) I can tuck in things that I don’t want to damage with pins.

Now I need to fill it with inspiration! Lots of it! Finished size is 60 x 60!!!!

20130719-085230.jpg

My Pinterest Party

IMG_9321

A few weeks back, I had this idea to gather all my pin-sane friends for a Pinterest Party. I am happy to report that last night, they all brought their A-game to my house and we had a fabulous evening. As you flip through the gallery of the evening, please note that what you don’t see are the CONTAINERS, BOXES, A COOLER and several CARRIER BAGS that these ladies brought and were hidden to the sides!

There were cocktails, wine, even 2 kinds of flavored ice cubes! We started with a few savory items, but really, this was a dessert-fest! SO. MANY. SWEETS! I am still adding pins as I find them and remember them, but you can find them all in our official Pinterest Party board, which of course includes links back to the recipes or tutorials. As time permits over the next few days, I will post about my own pins and the tips that I have to add, and if any of my pinterest-buddies want to guest post about the process of making their pins, this is my invitation to do so.

 

 

 

 

Before and After: bathroom mirror

IMAG0341

Wow, somehow, a LOT OF TIME went by since my last post! Partly due to procrastination, partly due to *someone* convincing me I needed to start working out! There are only so many hours in the day, and if I’m working out, I’m not fixing things!

My plan for the weekend was to paint the patio, but the temperature is just too cold, the paint would not stick. So instead, I finished a project I have been planning for months and months: framing my bathroom mirror.

The Before:

Practical, but oh so ugly.

And now the After:

This, my friends, was easy-peasy AND super cheap! 3 pieces of baseboard molding at 7$ a pop, 2 cans of high-gloss black paint at 8$ each and about 1 hour of work (plus drying time). First I took the baseboards outside and painted 2 coats over  couple of hours. Then I measured carefully. But the truth it, it’s very forgiving. The trick is to cut perfect 45 degree angles, using a mitre box, as so:

Once I had one piece measured for the top, I marked the bottom piece to match. Then I cut one side piece and marked the other side piece to match. 4 flat L brackets and tiny screws to hold the corners, and I installed the entire thing using the double-sided velcro picture strips from 3M, since it’s super light. Finally, my mirror is framed!

The bead-board backsplash makeover

IMG_9075

wow, how did 2.5 weeks go by without a post? Oh I know! I’ve been DOING things and not posting them! My biggest issue is pictures… I want the blog to showcase my work in the best possible way, which means nice pictures. But In truth, I don’t always have my camera, and when I do, I don’t always upload the pics to my computer… Why can’t they make a good SLR that uploads by Blue-Tooth??? Anyhow, I have pictures, they are in the computer, so here you go!

This is the country house back-splash before. Some of you might like it. It was probably very trendy and fancy in 1994 when it was installed. I don’t like textured ceramic. And that sunburst drove me insane.

So off to Home Depot I went and purchased panelling… yes, the stuff people keep ripping OFF their walls, I put some up! Grant it, it’s not the ugly brown with grooves, but rather white bead-board, pretend wainscoting. In order to keep it simple, I made newspaper templates of all the sections. This kept me from needing to measure and make tons of notes. I just taped and folded the newspaper to fit exactly all the different parts of the wall around my counter:

I took my templates back to the city, where I cut the pieces in my basement. This was rather messy, as the material makes a TON of dust. So I am quite glad I did it where I did. Also, it made bringing the pieces back to the country so much easier, as the largest piece was only about 2.5 feet long and 18 inches high.

To install them, I used No-more-nails. I am not going for long-term permanent installation here. I am trying to cover up the ugly tile, brighten the room and make it look pretty for re-listing. Let the future owners figure out a better solution that will fit with their taste!

I did use a few nails here and there to hold the pieces while the glue was setting. And at the end, I sealed all the edges and the seams between pieces with white silicone. I think I might want to put a coat of white paint over the whole thing, but it actually works as is for now.

 

 

Before and After – Wallpapering my stairs

IMG_9004

Lest you think that I have completely given up on doing things myself around here, I had what I like to call a Project Day today. First, I cut all the beadboard panels for what will be the new backsplash at the country house (come back for that one!). Then, I grabbed a roll of wallpaper and redid my stairrisers.

Close your eyes. OK, actually, don’t, because you need to keep reading. But picture your house stairs in your mind. Not the walls around the stairs, but the stairs themselves. Are they pretty? I’m going to take a wild guess and say no. If you are really lucky, you have dark wood and white risers. I remember at the last house, when I painted the risers. The internet went wild! How could I paint hard wood? Actually, I think it was more painting all the mouldings than the risers, but still.

In the last 2 months, I have become OBSESSED with staircases. Why don’t we do more to our stairs? Stairs can be so pretty! Check out the Pinterest board I created!

Ok. Are you back? great! Some of you might remember my wallpaper saga of 4 years ago. The Russians hung my hard-to-get UK wallpaper at a 5 degree angle, driving me totally batty in the process. I got them to buy me new rolls of the same wallpaper, but never re-hung it because I was so scared! Then we moved and I found a very elderly Polish gentleman who did not speak English or French but hung my wallpaper with such precision that I had 2 rolls left. Since the wallpaper is in the front hall, I thought it would be nice to carry the color towards the upstairs by wallpapering the risers. Here are the before and afters:
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

See? Don’t you want to go up the After with a spring in your step? It was SUPER easy and very quick. I used about 1/2 a roll of wallpaper and 1/2 a gallon of Border and Repair Glue (not actual wallpaper glue, the special stuff for borders).

Because my stairs are 40″ wide, I could not cut the wall paper in the standard direction. So I measured my riser height (5.5″) and cut very long strips sideways on the roll. I cut those strips down to 40″. So technically, the wallpaper is hung on it’s side. If you have a particular pattern in mind, you need to be mindful of this.

I put the paste on the back of the strips and ‘booked’ them for 5 min. That just means letting the glue settle into the paper. Because I was doing it on high-traffic stairs, I also brushed on some glue onto the risers before applying the paper. Then, it was about 1 second of adjusting the paper in place and rubbing it in with a small plastic spatula (the kind I usually use for putty).

I have a lot of suggestions for doing this:

  • if you are staging your house, this is a way to spruce up your stairs and make people want to go see what you have upstairs, all for under 40$
  • if you have debated painting your risers white but were afraid to commit, buy a roll of the paintable white wallpaper and put it up. You can live with it as is, or if you decide to commit to painting, these strips will come off very easily.
  • you could easily do this with fabric. I would probably spray it with sizing first to make the edges sharper when cutting them.
  • Mix and match! some of the pins on my board alternate patterns. You could use 2 complimentary patterns, or mix up a bunch of scrapbooking papers and go wild!

For your enjoyement, here are a few pics of the ‘During’ process

Past Projects: the head-board bench

20120122_140119

I’ve recently been asked to put together a ‘portfolio’ of sorts – projects I have done in the past. Which has involved going through an extremely overloaded external hard drive looking for After pictures, because we all know I always forget to take Before shots!

One of my favorite projects was the head-board bench. Years ago, before we even had kids, I bought a head and foot board set for I think 20$ at a garage sale down the street. Then I did nothing with it for over 3 years. Once we had kids, I needed a bench for them to sit on when putting on winter boots. I had a bench, but they were too short to sit on it alone. So I dug out the head and foot board. I cut one piece in half, bolted it together through the sides and screwed a piece of plywood in the U-shape. Covered with foam and fabric. Voila, shoe-putting-on bench.

Now that the girls are big and it’s no longer needed in the front room, it has migrated to the cottage, where it serves in the guest room as a Put-your-stuff on bench. I still love it though.

Ubercrafty in New Jersey: Will Work For Wine

kitchen 1 after

Unless this is the very first time you read one of my posts, you will know by now that I have a ‘penchant’ for wine as we say in French. Combine that with a 3-night stay at my friend’s in Jersey during my annual work-play trip to the NYIGF and you have got a serious fun time on your hands. To pay for my room and board and copious amounts of red wine, I agreed to make Mrs. Figby some kitchen blinds. Instead of taking you step by step, I will first point you to her blog. Go read it, I’ll wait here….

For the record, I was not hung over, just slightly dehydrated.

We were working from this tutorial that she found online.

Let me just tell you how I tweaked it to make it work for us:

  • I don’t glue, I sew. So we measured the windows and added 2 inches on each side for seam allowance and sewed those down. I added an inch at the top, which eventually got hot glued to the very top of the mini-blind header. And I added 5 inches to the bottom: 4 inches for a large reverse hem and 1 inch to fold over. Since the first slat is installed at the edge of the 5 inches, we got a really nice heavy bottom to the blinds when they are up and they hang perfectly over the ledge of the window when they are down.
  • I didn’t glue the slats as per the tutorial. Instead, I took scraps of fabric and made 2 inch strips that were less wide then the over all blinds. Then I sewed these on to the back where I wanted to slide in the slats, much more like a traditional construction of roman blinds. It took longer than gluing them on, but the finished product is that much stronger and more polished. If you had a plain fabric or a pattern that would not be disturbed by pleating, you could just cut your blinds 2 inches longer for each slat you want to put in and make pockets in the back. For the record, the small windows have slats every 8 inches and the large windows have slats every 9.5 inches. Don’t ask my why I decided that, I guesstimated the first ones and decided we should have the same number of slats on the second one.
  • The one annoying thing is that the inexpensive mini-blinds only came with right-hand ropes. If I were to this for my house, I would hunt around for either reversable blinds or try to find some used ones that have a right and a left-hand rope to have the ropes on the outside. Luckily for me, my *client* didn’t seem to mind!

before and afters, for your enjoyment!

 

 

The cottage floor, before, after and after-after

wpid-230417_10150179307441254_522241253_7247334_8353486_n.jpeg

For 7 years the floor at the cottage was stained brown and totally scratched. It was worn when we bought it, and 7 years of country life with kids and dogs didn’t help it. 2 weeks ago, I moved the furniture to one side, grabbed a couple of gallons of deck/balcony paint in paper cotton white and put on 3 coats. Then I moved all the furniture to the OTHER side, put an other 3 coats and waited a week….
Last weekend we put everything back. The entire house was SO much brighter! But I didn’t *love* the kitchen… it was a bit flat… luckily, with a striped floor pin on one of my pinterest boards and 3 old paint cans from previous projects, I managed to give it exactely the right look!

Now…. I have a great idea for that ugly backplash.
.

Pop the cork on the kitchen knobs!

wpid-IMAG0778.jpg

Sadly, I did not drink the 29 bottles of champagne to get the corks. I just bought them on etsy.

In my attempt to spruce up the cottage kitchen before re-listing it, I decided to change the ugly 80′s country knobs. With no budget, I spotted corks as knobs on Pinterest and the rest took care of itself. 45 minutes later: pop!

Chalkboard wine glasses

wpid-20111217_085735.jpg

image

I cannot drink wine from a plastic cup, I just can’t. So I needed to get extra wine glasses for our holiday dinner at the cottage, where I have only 4 wine glasses! Again, the various thrift stores yielded a nice mismatch of shapes and sizes. I saw chalboard-dipped glasses on Pinterest but my black paint was old and totally separated. I did have tiny jars of colored chalkboard paint (used to sell them at my store, craft stores carry them) so I picked a light yellow/green and brushed it onto the bottom of the glasses. I didn’t dip for 2 reasons: not enough paint to get high enough on the stem and I didn’t want paint on the bottom, which could rub off on the furniture.
The paint can’t go in the dishwasher but we usually hand wash glasses anyhow. I picked out red chalk for people to scribble with, I’ll post pics after the party(ies)